|
Anne Arundel County is seeking contractors for the rehabilitation of the existing 1.5 million gallon Linthicum storage tank, located in Annapolis, Maryland.
Bids are due March 14. The cost of work is estimated between $1,500,000 and $2,000,000.
Scope of Work
This project involves rehabilitating an existing 146-foot-high by 100-foot-wide toro-pillar elevated water storage tank.
The wet interior of the steel storage tank will be abrasive blast-cleaned to White Metal (SSPC-SP 5) standards and coated with a three-coat epoxy system. The dry interior will be power-tool cleaned to White Metal (SSPC-SP 11) standards and coated with a three-coat zinc-epoxy system.
|
|
|
Anne Arundel County |
|
Anne Arundel County is seeking contractors for the rehabilitation of the existing 1.5 million gallon Linthicum storage tank, located in Annapolis, Maryland.
|
The tank’s exterior surfaces will be abrasive blast-cleaned to a Near-White (SSPC-SP 10) standard and coated with a prime coat of a modified aromatic polyurethane, an intermediate coat of an aliphatic acrylic polyurethane, and a finish coat of advanced thermoset fluoropolymer.
The contractor will also abrasive blast-clean to Commercial (SSPC-SP 6) standards and coat ductile iron piping with a modified polyamidoamine epoxy system.
All interior horizontal, vertical, and overhead concrete will be abrasive blast-cleaned to SSPC-SP 13 standards or high-pressure washed prior to applying an epoxy resin binder and coating system.
The owner has specified that coating materials be manufactured by Tnemec, however, the contractor may substitute equivalent products by approved manufacturers such as Sherwin-Williams or Carboline.
Containment according to SSPC-Guide 6 will be required, as lead is present in some of the existing coatings.
Reported by Paint BidTracker, a construction reporting service devoted to identifying contracting opportunities for the coatings community. Try PaintBidTracker free!
|
Follow us on Twitter
Join us on Facebook
